Flask Moulding Line
Flask Moulding Line
Semi-Automatic Moulding Line
Static Pressure Moulding Line
Flask Moulding Machine
Air Multi- Piston Moulding Machine
Hydraulic Multi- Piston Moulding Machine
Jolt Squeezing Moulding Machine
Static Pressure Moulding Machine
Flaskless Mouldind Line
Horizontal Flaskless Moulding Line
Flaskless Moulding Machine
The Pouring Equipment
Semi-Automatic Pouring Machine
Fault diagnosis steps of hydraulic system of automatic moulding machine
by admin on 21-02-22
There are many faults in the hydraulic system of the automatic molding machine. For example, oil pollution may cause the hydraulic control system’s working pressure, flow or direction to malfunction, and bring a great difficulty to the hydraulic system’s fault diagnosis. The next step...
What issues should be considered when automatic molding line layout?
by admin on 21-02-01
1. Selection of the main and auxiliary machines of the production line of a molding enterprise and the layout of the production line. A type of material that is mainly affected by the modeling design, such as ordinary clay sand, sodium silicate sand and resin sand; modeling research method...
What are the reasons why the automatic molding machine does not shock?
by admin on 21-01-21
1. In the process of detecting the failure of the molding machine, the air filter is blocked. Because the vacuum pump can generate some water during the development process, the filter element in the air filter will be blocked by adding some foreign matter in the pipeline for a long time. ...
Dealing with failures encountered when using a fully automatic molding machine
by admin on 21-01-07
1. Due to long-term vibrations, molding development opportunities continue to appear. The following molding machine failures: The six M20 hexagon socket screws connecting the vibration table and the vibration piston are loosened, so that there is a gap between the vibration table and the piston s...
How to improve the accuracy of the automatic molding machine?
by admin on 20-12-24
In order to improve the accuracy of the automatic molding machine, the small flash of the parting line is finely processed. The moulding machine can be operated smoothly, reliably and safely because it is driven by the hydraulic system. The equipment is equipped with a robot, which can reduce the...
How should the common problems of automatic moulding line be overhauled?
by admin on 20-12-16
一. Inspection of machinery and equipment 1. The jar should be intact, and the posture of the equipment should be flexible and reliable. We should install an anvil pad between the anvil and the shock cylinder as a noise-absorbing and shock absorber. 2. The body guide rod or guide block should be ...
How to deal with the shutdown of the automatic molding machine under different conditions?
by admin on 20-12-10
1. Shut down after shift People usually need to leave work after work and you need to stop. In this case, the production staff should check the molding machine so that there are no fragments of material in the equipment. Therefore, people can keep the equipment clean by cleaning. 2. Temporary shu...
Automatic molding machine manufacturers share how to choose a molding method?
by admin on 20-12-03
1. Dimensional accuracy of castings. When producing castings with high dimensional accuracy and high surface quality requirements, the molding method of sand compaction should be selected. 2. Casting material. Different casting materials have different requirements for sand mold stiffness. -Gener...
How to check and repair the common problems of automatic moulding line?
by admin on 20-11-26
The key electronic components of the automatic molding line should be applied and stored by full-time personnel, and the maintenance work should be done anytime and anywhere. Add grease to cylinders and guiding shafts daily. The template should be sturdy, and the core box screws must be tightened...
How to choose the molding method of the automatic molding machine?
by admin on 20-11-17
1. Dimensional accuracy of castings. When producing castings with high dimensional accuracy and high surface quality requirements, the molding method of sand compaction should be selected. 2. Casting material. Different casting materials have different requirements for sand mold stiffness. Genera...
3 kinds of shutdown conditions of automatic molding machine
by admin on 20-11-11
1. Shut down after get off work People usually need to leave work after work, so they need to stop. In this case, the production staff should check the fully automatic molding machine so that there are no fragments of material in the equipment. Therefore, people can keep the equipment clean by cl...
Precautions for installation and debugging of automatic molding machine
by admin on 20-11-03
1. When the automatic molding machine arrives at the customer site, first confirm whether there is any damage to the appearance and whether the molding machine is damaged due to transportation or lifting; 2. Confirm that the base of the molding machine is in firm contact with the foundatio...
Page 1 / 2
Hit enter to search or ESC to close